Engine On Sensor Cable
Genesis Offroad

Engine On Sensor Cable

SKU: 226-EOS
In stock
Sale price$15.00

This optional cable changes the threshold for connecting/disconnecting the batteries in the Jeep Wrangler JL & Gladiator due to its smart alternator. 

Not needed for vehicles with alternators that do NOT drop the voltage down below 12.7v while the engine is running, such as the Toyota vehicles that we support, or the older Jeep JK.

Highly recommended for the Jeep JL & Gladiator

This cable tells the Gen 3 Power Hub that the engine is running, and therefore the Power Hub will NOT isolate the batteries even if the smart alternator drops the voltage below 12.7v.

EASY INSTALL

To use, lift bus bar cover and grab the small green wire, plug in sensor cable into the green bullet connector, route cable to the factory fuse box, find and remove any ignition-hot circuit fuse, insert factory fuse into fuse tap, insert fuse tap into factory fuse box.

SMART ALTERNATOR

Ensures the Aux battery continues to charge even when a modern 'smart alternator' senses the batteries are full and turns down its output.

BATTERY THRESHOLD

Connects batteries together 30 seconds after engine starts, leaves them connected unless voltage drops below 11.6v with engine on, or under 13.1v for 5 minutes with engine off.

Product Specification

Fuse Tap

Micro Fuse Size
20 amp fuse included

Connect Threshold

Connect: 30 seconds after engine starts

Disconnect: below 11.6v with engine on, or below 13.1v for 5 minutes with engine off

Contact Us

Do you have any questions?

We're here to help!

Fast shipping

Most orders placed by 3pm Central time ship the same day!

Customer service

We have the best customer service in the industry! Seriously, we're here to help!

Get Featured

Send us pictures of your Genesis parts to be featured on our site!

Be Social

Tag @genesisoffroad or use #genesisoffroad