Q: What gauge wire is this product pre-wired with?
A: The loomed harness uses 12g wire, and the panel uses 16g between the sockets.
Q: I’m curious as to what the dimensions for this are. I have a 2022 Tacoma with a cutout that looks like this would fit into but I’m wondering about the exact dimensions for this and the 3 socket one.
A: Technical drawings are provided in the last image on each of the product's pages.
Q: can I piggyback another unit off of this one? or run a wire to another component off of the open terminal on the back of the middle outlet?
A: This unit is designed as a standalone device, and the breaker is meant to control the two sockets included. CAN you piggyback or add other devices? Probably. SHOULD you? Absolutely not.
Q: I don’t currently have plans for a dual battery system. I have a portable battery (dometic plb40) that I plan to use for the time being charging via a 12v socket in my wrangler jlu in combination with a fridge. I would like the option of having my added sockets be on all the time or have the ability to quickly turn them off as to not draw down my main battery. Would this circuit breaker/switched model provide that protection? Is the lighted switch always lit or only when on? Thank you for your time.
A: The sockets are on a switch/breaker, so you can cut power to the sockets by flipping the switch at any time. The light is on when the sockets are energized. Turning the panel off via the switch/breaker also turns off the light.
Q: What are the dimensions of the panel of the two-socket accessory panel?
A: Dimensions are provided in the last image on the product page. That image can be seen at the link below: