0 Items
  1. Home
  2. G Screen Monitoring System
  3. G Screen for Toyota 4Runner, Tundra, Jeep Wrangler JL, and Gladiator
G Screen for Toyota 4Runner, Tundra, Jeep Wrangler JL, and Gladiator
G Screen for Toyota 4Runner, Tundra, Jeep Wrangler JL, and Gladiator

G Screen for Toyota 4Runner, Tundra, Jeep Wrangler JL, and Gladiator

2 Review(s) Write a Review
Your Price: $269.00
Part Number: 184-GS
Availability: In Stock, ships FREE within 24 hours

Choose Options

Note: This version is compatible with our Toyota 4Runner, Tundra, and Jeep Wrangler JL and Gladiator dual battery kits.

Our Wrangler JK, Toyota Tacoma, and Universal dual battery kits must use G Screen part number 141-GS.

Monitor your on-board air system with our new digital air pressure sensor option! See below for details.

Monitors voltage levels of both batteries

Remote status indicator - batteries connected or disconnected

Remote boost button - jump start the engine from inside the cab if your cranking battery is dead

  • Press the Boost Off screen for 3 seconds to manually reconnect your batteries to use the aux battery to help start the engine

Background changes color to visually show your battery status at a glance

  • Green-both batteries are fully charged, and they are connected (Screen shows Boost On - this is the normal operating mode)
  • Yellow-the cranking battery is below 12.7v, and they are disconnected (Screen shows Boost Off)
  • Red-at least 1 battery is below 12v. The screen will blink red a few times per minute to get your attention

Backgound light turns off after about 45 seconds of inactivity

  • Preserves battery power
  • No glare while driving at night
  • Voltage and status is still visible, but without the backlighting
  • If a battery drops below 12v, the screen flashes red a few times per minute

  • Press the screen to turn the backlight on at any time

  • Adjustable contrast - hold down the software version screen to access the contrast adjustment menu


Measures approximately one cubic inch. Compact size makes it easy to mount anywhere.

Includes a 10' wiring harness for simple, clean installation

Software upgradable for future features

Order with your dual battery kit for no extra shipping charges

NEW! Add the digital air pressure sensor from the options above to monitor the PSI level in your on-board air system.

Screw the sensor into an available 1/4" NPT port on your air tank or manifold

Attach the waterproof cable to the sensor, and route the cable to the G Screen. Plug the other end into the interface module.

The G Screen automatically detects the sensor and adds a new screen showing the PSI level in your tank, from 0-150 PSI.

No air hoses to run, no wiring to figure out!

World Class Quality

The best dual battery kits available anywhere

Same-day shipping

Most orders placed before 3PM CST ship the same day

premium support

Technical Support available before and after the sale

international shipping

We ship wherever you are